Tel: +86-27-85568138
GDHG-108A CT/PT Tester supports test voltage method to test bushings CTs which installed on transformer or inside switch-gear, suitable for the laboratory and on-site detection.
It can be easily and conveniently done voltage current characteristic, transformer ratio, ratio and phase angle error, load test items on CT/PT.
Main functions
CT (voltage detection) |
PT |
• Voltage current characteristic curve (excitation characteristic) |
•Voltage current characteristic curve (excitation characteristic) |
• Auto calculate knee point value |
• Auto calculate knee point value |
• Auto display 5% and 10% error curve |
• Turns ratio measurement |
• Turns ratio measurement |
• Polarity determination |
• Polarity determination |
• AC Hipot Test |
• AC Hipot Test |
• Demagnetization of iron core |
• Demagnetization of iron core |
• Voltage multiple can be adjusted (1.2-2.5times) in PT VA characteristic test |
• Accurate limit factor(ALF) measurement |
|
Main parameters
Item |
Parameter |
|
Power supply |
AC220V±10%, 50Hz |
|
Output |
0-1000Vrms(20A peak) |
|
Accuracy of excitation measurement |
≤ 0.4% of the reading+0.6% of the range |
|
CT turns ratio measurement |
Range |
≤3000A/1A(15000A/5A) |
Accuracy |
±1.0% |
|
PT turns ratio measurement |
Range |
≤500 KV |
Accuracy |
±1.0% |
|
Operation environment |
Temperature: -10℃ ~ 40℃, humidity: ≤90%, Altitude: ≤1000 m |
|
Dimension&Weight |
440*360*340 mm, ≤ 22 Kg |
Accessories
CT/PT Tester 1 piece
Test Lead 1 set
Earth cable 1 piece
Power cord 1 piece
2A fuse 2 pieces
User's guide 1 copy
Factory test report 1 copy
Company
All Rights Reserved Copyright@HV Hipot Electric Co.,Ltd.