-
GSH-C-NYA-30/60 SF6 Gas Recovery Machine (200L Storage Tank)
This machine includes an SF6 compressor, a vacuum pump, a vacuum system with an anti-oil return device, a liquid storage tank, a purification system with a built-in regenerative dryer filter, a dust filter, a ball valve, a vacuum gauge, and auxiliary facilities such as electrical control, pressure detection, thermometer and alarm devices, and control and instrument panel.
It is suitable for SF6 electrical equipment, GIS manufacturer and institute.
(In winter, the vacuum pump oil condenses at low temperatures, so the vacuum pump will make a loud noise due to dry friction for a period of time after it is turned on. The noise will return to normal after the oil temperature returns to normal.)
-
GSH-C-YNA-11/45 SF₆ Gas Recovery Machine | Built-in 300L Storage Tank
GSH-C-YNA-11/45 Intelligent SF₆ Gas Recovery, Purification, Vacuumizing and Refilling Integrated Machine with 300L Built-in Liquefied Storage Tank, for On-Site Maintenance of Medium-Voltage SF₆ Switchgear, Circuit Breakers and Instrument Transformers.
-
GSH-NNA-30/250-400 Mobile Heavy-Duty SF₆ Gas Recovery Unit
GSH-NNA-30/250-400 heavy-duty SF6 gas recovery unit: 30m³/h recovery rate, 250m³/h high-capacity vacuum, 400kg liquefied storage. Integrates recovery, vacuum, deep purification, liquefaction and refilling. PLC auto control, multi-stage safety protection. Mobile industrial design for large GIS & EHV switchgear.
-
GDJS-8A Insulation Gloves (Boots) Test Set
GDJS-8A insulation gloves(boots) test set can perform intelligent insulation withstand voltage tests on insulating boots, insulating gloves, and other safety tools as required. The test cycle for insulating boots and gloves is six months, and breakdown is not allowed during the test. Simultaneously, the leakage current of the insulating boots and gloves must not exceed the limit value. The product is suitable for all power-related industries.
-
GDPV-I Handheld PV Array IV Curve Tester
GDPV-I Handheld PV Array IV Curve Tester can test voltage up to 200V, current test up to 20A, and can test 1000W PV modules. It can test parameters such as open-circuit voltage, short-circuit current, and maximum power of solar cell modules/square arrays. Provide users with accurate and efficient volt-ampere characteristic testing tools.
-
DRM-10W DC Winding Resistance Meter
The DRM-10W DC winding resistance meter is a precision device that efficiently diagnoses potential problems such as coil material defects, poor welding, loose connections, and broken strands by measuring the winding resistance value. Adopting a high-precision constant current source and four-wire measurement technology. Automatically eliminates lead errors and precisely captures subtle resistance variations, ensuring stable and reliable measurement results.
-
GD-4134E Cable Identifier
GD-4134E cable identifier is a high performance underground metallic pipe locating system. It consists a transmitter and a receiver, can be used to do route tracing, pipe exploration and depth measurement of the underground cables and metallic pipes.It can also be used to identify target cable from a bunch of cables, locate the pipe insulation damage and part type cable fault.
-
MRT-15 Insulation Resistance Tester
MRT-15 Insulation Resistance Tester is widely used in maintenance of electrical equipment in transformer substation, power plant, etc. It is suitable for carrying out measurement of insulation resistance (IR), absorption ratio (DAR) and polarization index (PI) of all kinds of high voltage equipment, including switch-gear, transformers, reactors, capacitors, motors, generators and cables, etc.
-
TDR-S Transformer Turns Ratio & Winding Resistance Tester
TDR-S Turns Ratio & Winding Resistance Tester is focusing on two core tests: DC resistance and turns ratio group of transformer winding. It adopts high-precision signal processing technology and is equipped with a high-precision core chip.This establishes a stable and reliable measurement foundation, providing substantial assurance for the accuracy and stability of the data; Featuring the smart quick intelligent power test system (Soft No. 1010215, trademark registration number 14684781),It is mainly used in power system transformer commissioning tests, overhaul tests, and daily maintenance and inspection.
-
MRT-5 HV Insulation Tester
MRT-5 HV Insulation Tester is a professional instrument developed and produced by HV HIPOT in accordance with IEC 61010-1 and other relevant standards. It is used to measure the insulation resistance of power transformers, cables, motors, lines and materials. It uses high-voltage DC injection technology to output a stable DC voltage to the device under test through an internal precision high-voltage generator, accurately measuring the leakage current and automatically calculating the insulation resistance value.
-
HVAD-53D AC/DC Hipot Test Set
HVAD-D SER AC/DC Hipot Test Set features a voltage regulator handle for smooth, controllable voltage increase and precise adjustments. Built-in AC/DC switching and grounding protection enhance safety and flexibility. Widely used in power equipment manufacturing, power maintenance, electronic component testing, military inspection, and lab research, it meets diverse high-voltage withstand test requirements and adapts seamlessly to industrial and scientific applications.
-
HPCI -5000A Primary Current Injection Test Set
HPCI -5000A Primary Current Injection Test Set is a professional testing device independently developed by HV HIPOT Company. It can output high amplitude current to test the performance indicators of various equipment under the rated current conditions. It adopts high-precision numerical control technology to effectively avoid the influence of external interference on the test data; it uses a converter made of low-power consumption, large-capacity autotransformer and high magnetic permeability core, which has the advantages of large output power, small size and light weight.
Products
Send your message to us:
Write your message here and send it to us